Drywall texture is the process of adding surface texture to drywall in order to enhance its appearance. There are four main processes for applying drywall texture: taping, scrubbing, floating, and spraying.

Taping is the process of applying multiple layers of joint compound onto an area of drywall then using a long sheet of textured paper called a “tape” to “wrap” the compound.

Scrubbing involves applying joint compound onto an area of drywall that’s been sanded with a coarse sanding and then using a stiff brush to “spread” the compound.

Floating refers to applying joint compound.

It is a pattern that is laid onto your walls with a putty knife and these are generally textured with a sponge to get the desired pattern. Each wall surface will have a pattern and the texture will go in one direction on an 8-foot wall. Here are a few common patterns:

Knocking: Knocking is a rough texture that is a lot like sandpaper and this is used most often in kitchens because it is more durable than other patterns.

Sand: Sand is a very light texture and it can look a lot like wood.

Shake: Shake is a very coarse texture that looks like wooden shingles.

It is the surface quality that is visible when latex paints or sealants are applied to drywall. Prominent types of drywall texture are given below:

Knockdown Drywall Texture

Knockdown Drywall Texture

Knockdown drywall texture is a textured coating that you apply to the drywall before painting. The texture provides a surface for the paint to adhere to and flattens and hides minor imperfections in the wall.

Durock Textured Coatings is an excellent product for home DIY projects. Applying Durock Texture and Paint on drywall typically gives the finished product a crisp, professional look.

It typically takes about 2-3 hours to apply the Durock Texture and Paint. Also, It is a two-step process that includes application of texture, followed by a clear coat paint.

It is a textured type of drywall, usually found in older homes, that is easily damaged by paint or wallpaper. This type of drywall is made from gypsum and a chain-saw fiber, which are then ground fine before they are put into plaster.

It can be applied to the seams in drywall to break up the continuity of the joint and create a more textured surface. It  can be applied to the seams in drywall and the seams are then sanded before a finish coat is applied.

See also: Knockdown Texture

Popcorn Drywall Texture

Popcorn Drywall Texture

Popcorn texture is a type of textured finishing applied to drywall, commonly found in older homes. The texture is made from two pieces of textured sheetrock, one smaller than the other, which are fastened to the wall with a mortar joint.

The larger sheet is applied to the wall, then the smaller sheet is embedded inside. A finish, often a white or light gray paint, is then applied to the surface of the drywall.

The popcorn texture on drywall surfaces is the result of the joint compound over the wall.

Popcorn texture is essentially a raised surface, made by an uneven application of joint compound. It is  is usually found on interior walls and ceilings. However, it can also be found on exterior walls.

Popcorn texture is created by applying joint compound over the walls, which dries in a way that causes it to have uneven bumps and ridges. Popcorn texture can be either a light color, or a darker color, depending on what type of joint compound is used. A darker color can also be created by applying a white or light color drywall mud and then sanding it. 

Popcorn texture is a type of textured drywall used for acoustics in homes. It is usually found in older homes, and is also used in renovation work to give new homes a vintage look.

Popcorn drywall texture is a cheaper version of other textures and has a cork-textured finish that is less costly than plaster. The downside is that this type of drywall is considered a fire hazard.

See also: Granite Countertop Colors

Comb Drywall Texture

Comb Drywall Texture

Comb is popular because it is a break from the standard drywall textures that people have in their home. This texture is a little more textured than the standard  texture, which would be a flat or smooth texture.

This texture is made from sandpaper to ensure that it has a light rough feeling to it. This style of texture can be very heavy and soundproof due to the roughness of the texture. This can be an option to have in a room where sound is coming from all angles.

COMB  texture is a great way to get a classic textured look without the time and expense of a traditional textured base. It’s a simple formula made for your base coat.

It ‘s much easier than the old-fashioned way of finishing walls with a trowel and grit texture. And with our last-touch application system, there’s no need to go back to touch-up any hiccups.

It’s stain-proof, ready to use, and easy to maintain. It’s free from corrosive chemicals and silicone. And it’s safe to use with our acrylic latex.

Combo  texture is a type of drywall that offers a refined texture and good sound absorption due to the sound absorbing material that is part of the drywall.

Combo drywall is made up of a layer of gypsum drywall that has a layer of peel & stick sound absorbing material on one side. The combination of the two materials provides excellent sound absorption and finishing.

Orange Peel Texture

Orange Peel Drywall Texture

Orange Peel Drywall texture is a type of drywall that produces a pattern on the surface that resembles an orange peel. The pattern is created in the production of the drywall by a machine. 

There are a few reasons why someone would want to have this type of texture in their drywall.

First, is that it is often cheaper than another type of drywall, as it is one of the cheaper textures. This texture can also be used for insulation since it does not require a primer. It is also lighter and easier to install than other textures.

Orange peel texture is the name given to a rough and bumpy texture on the surface of drywall. It is a type of drywall that is porous, and this helps to make it more resistant to mold and mildew. Orange peel  is not a new drywall, but it does date back to the 1930s. It is often found in older construction.

It  is a product which is generally available as a pre-mixed drywall compound.

Also, It is a user-friendly material which can be troweled or sprayed onto the drywall panels. Orange peel drywall texture is made by mixing sand, cement, and an organic material in the desired ratios with water, and it is also often mixed with additional ingredients such as cellulose, paper, or fiberglass.

See also: Stainless Steel Countertops

Venetian Drywall Texture

Venetian Drywall Texture

If you’re looking for a new home, you should be aware of a new type of drywall called Venetian drywall.

This type of drywall is made from gypsum and has the texture of marble, which is less expensive than sheets of marble.

In addition to being less expensive, this type of drywall is also fire resistant and will not emit toxic fumes when burned.

However, the people who produce this type of drywall are only certified for use in the US, not Mexico, Canada, or anywhere else in the world.

Venetian texture is named after the Italian city of Venice, a city of canals and water. This type of drywall is a plaster-saturated, gypsum drywall that offers an elegant, yet muted appearance.

It is also known as a plaster-board texture, a type of surface texture that is applied to drywall for decorative purposes. It typically has a smooth finish.

Efforts have been made to reduce the use of the Venetian drywall texture due to the harmful effects of asbestos and asbestos-containing drywall.

Sand Swirl Drywall Texture

Sand Swirl Drywall Texture

The Sand Swirl drywall texture is a new design that is being experimented as an alternative to standard drywall texture. Sand Swirl drywall has the appearance of a desert-sand dune.

This texture is being considered for its ability to create the look of natural sand and stone from which the pattern originates. Another advantage of Sand Swirl texture is that it is more cost effective than standard  texture.

The downside to Sand Swirl drywall is that it doesn’t provide the fire or water protection of standard drywall.

Sand swirls, or as they are known in the drywall industry, “fire marks” are most frequently found in ceiling and vertical wall joints.

The name is derived from the visuals that look as though a roofing shingle just went out of control and whipped around a tight corner of a house. These patterns are also commonly found on the backs of drywall panels.

The marks are the result of manufacturing faults and are most often found on lightweight papers. These papers have a tendency to scratch more easily and have a higher tendency to have undesired patterns.

Drywall containing these flaws are typically pulled off the line and thrown out. These flaws may also be left.

Stomp Brush Texture

Stomp Brush Drywall Texture

Stomp brush is a drywall texture which can be used to create a plain and flat appearing finish.

It  is just that, a textured appearance that’s applied to the drywall surface. There are many textures such as cedar, slate, and plaster. One of the more popular ones is a strategy called “stomp brush.”

It is named by the sound that the texture creates when it is being applied to the drywall. It is also known as the “attitude” or “pine needle” finish.

The process is also very easy to apply, and it is one of the most inexpensive  textures. However, for price-conscious do-it-yourselfers, it is also one of the most time-consuming.

Here is what you need to know about Stomp Brush Drywall Texture.

Stomp Brush Filter

Every Stomp Brush Texture, no matter the style, begins with Stomp Brush. This highly advanced filtering process is an industry first, specifically for drywall textures. It can deliver a smooth, glossy surface, or a rustic, weathered surface. It can also give a subtle look or a stark, tough look with some pops of color.

Skip Trowel Drywall Texture

Skip Trowel Drywall Texture

The Skip Trowel Drywall Texture is a very textured drywall. Skip Trowel is the textured finish of the textured paper. This type of drywall has a textured surface, which is not too gritty. The result is a drywall that has a slightly more pliable texture, but a bumpy one that will not become slippery. This type of texture is ideal for an environment like a public restroom.

It is one of the most common textures used on exterior walls, and interior walls and ceilings that will remain dry, like inside a kitchen or bathroom. The texture is created by applying joint compound with a trowel with ridges on the back, resulting in a light mud to heavy mud appearance. This texture is medium to light, and is a great option for walls that do not receive a lot of abuse.

Skirt trowels or power trowels were created with the hope of enabling masons to create an even surface. The speed at which they work is based on the speed of the trowel and the wetness of the plaster. Skirt trowels create an even finish that stores water.

These devices often have a sandpaper flap on the back, which is useful for smoothing out rough patches and sloped surfaces.

Lace Drywall Texture

Lace Drywall Texture

Lace Drywall Texture is popular  in the United States, especially in regions with high humidity. It is popular because it is not too rough on the hand and also conceals blemishes in the drywall.

The texture also makes it easier to keep flaked and cracked drywall from showing up. Along with this, the texture also helps with plastering.

This may sound odd but the texture helps with plastering because the bumps on the drywall become air pockets. This is beneficial for plastering because the plaster expands into these bumps and does not show on the outside of the drywall.

Slap Brush Drywall Texture

Slap Brush Drywall Texture

Slap brush drywall texture is a rough finish that you can achieve with a standard 3-inch paint roller. This type of rough finish is often applied to ceilings to provide more texture and to provide a more textured barrier against water. When done right, slap brush drywall texture can be a beautiful and durable finish, though it can also be sloppy and difficult to make consistently.

The cost of installing this type of texture is around $10 to $15 per square foot. There are various ways to install this type of texture, but drywall screws are recommended to ensure no cracks develop. A carbide bit of a 3/8 inch drill is recommended for drilling holes.

Pros and Cons

  • Drywall is a noncombustible building material used to build and support interior walls, ceilings, and fireproofing. 
  • Traditionally, drywall material has been either smooth, having a very matte surface, or white from plastering or painting. As these coatings were applied, the material would be pushed up, causing a raised texture. 
  • One of the other advantages to this popular choice is the additional sound insulation that it provides. It  is also resistant to heat, which makes it perfect for climates where summer temperatures are intense. There are also fire-retardant properties that come with drywall texture.
  • However, in recent years, a new drywall has emerged which now only has texture on the surface, not on the back. When drywall is being built, this material is slightly more expensive because it is the only type that does not include a layer of rockweed.
  • Building drywall is a serious undertaking that takes time, knowledge, and skill. Because of how difficult it can be to get it right, many people opt for drywall texture to help hide any imperfections.